quality

Quality1

Quality You Can Swear By

Pavimento Floor go through some of the most stringent quality tests in the industry. Before a Pavimento product becomes a part of your home or office space it goes through thorough tests for heat resistance, crack-resistance, stain-resistance and scratch test all at an ISI certified laboratory equipped with specialised Q&A machines from Germany and the USA.

As far as Pavimento products are concerned, ‘ tested ok’ would be an understatement. We test a product until we know for sure that it’s more than just ok. It has to be great. It has to last. Quality is what we built our company upon. And it’s what every Royale product is made of.

Characteristics Test Method Requirements
General Requirements
Squareness EN 13329 ≤ 0.20mm
Straightness EN 13329 ≤ 0.30mm
Flatness of the elements EN 13329 Width: concave ≤ 0.15%
convex ≤ 0.20%
Length: concave ≤ 0.50%
convex ≤ 1.00%
Openings EN 13329 Ø ≤ 0.15mm / max. ≤ 0.20mm
Height difference EN 13329 ≤ 0.10mm / max. ≤ 0.15mm
Residual indentation EN ISO 24343-1 ≤ 0.05mm
Light fastness EN 20105-A02 grey scale level ≥ 4
Classification Requirements
Castor chair resistance EN 425 noi damage with type W after 25000 cycles
Locking strength ISO 24334 Fl0.2 ≤ 1.0 kN/m
Fs0.2 ≤ 2.0 kN/m
Movement of furniture leg EN 424 no damage with type 0
Resistance to staining EN 438 (5 group 1 and 2), 4 (group 3)
Surface soundness EN 311 ≥ 1.25 N/mm²
Wear resitance (AC4) EN 13329 IP ≥ 4000 cycles
Wear resitance (AC5) EN 13329 IP ≥ 6000 cycles
lmpact resitance (AC4) EN 13329 small- diameter ball ≥ 12N
large- diameter ball ≥ 750mm
lmpact resitance (AC5) EN 13329 small- diameter ball ≥ 15N
large- diameter ball ≥ 1000mm
Thickness swelling (AC4) EN 13329 ≥ 18%
Thickness swelling (AC5) EN 13329 ≥ 15%
Essential Charasteristics
Reaction to fire* EN ISO 11925-2
EN ISO 9239-1
Cfl – S1
Slip resistance* EN 13893 DS
Formaldehyde* EN 717-1 E1